WELCOME TO SUNRISE
  • X.com
  • facebook
  • instagram
  • youtube
  • linkedin
+086 139-5012-2117
Janisa@xiruicn.com

marine valve-VALVE

Quick-closing marine globe valve

This JIS F7399 marine quick-closing globe valve is an emergency safety valve for ship fuel oil tanks, lube oil tanks and oily pipelines. It adopts angle globe structure with dual control: normal opening and closing by handwheel, emergency rapid shut-off by pneumatic remote control. When fire risk occurs in engine room, the valve can cut off oil supply instantly to avoid fire spreading, which meets SOLAS marine fire safety regulations. All valves are hydrostatic tested before delivery. Surface coated with anti-corrosion marine paint. Marine classification certificates such as CCS, NK can be provided upon request.

Marine gate valve

This JIS F7363 5K marine gate valve is a non-rising stem wedge gate valve, widely installed on ship piping systems for ballast, bilge, fire-fighting and domestic water lines. The valve body adopts FC200 grey cast iron, with bronze sealing face, good corrosion resistance for seawater service. Manual handwheel operation, only for full open / full close cut-off, not suitable for flow regulation. All valves are hydrostatic tested before delivery, comply with JIS marine valve standards. Certificates such as factory test report, material certificate, marine survey certificate can be supplied upon request.

Marine angle-type stop valve

This JIS 5K marine angle stop valve is widely used on ship piping systems for seawater, fresh water, fuel oil and compressed air lines, to control the on-off and throttling of medium flow. The valve body is made of FC cast iron, with brass stem and trim, flange connection, outside screw & yoke design, reliable sealing, anti-corrosion and long service life, complying with marine pipeline requirements. We also supply straight type marine stop valves of the same series, full sizes available, ready stock & third-party inspection acceptable.
Marine valves are critical components for ship piping systems to control, shut off, throttle or reverse media flow. Our main marine valve types include:
Marine Stop Valve: Straight & angle pattern, for opening and closing pipelines, also for flow throttling.
Marine Gate Valve: Full bore, low flow resistance, widely used for on-off service.
Marine Check Valve (Non-return Valve): Prevent medium backflow, protect pumps and pipelines.
Marine Globe Valve: Good sealing performance, suitable for frequent cut-off and flow regulation.
Marine Butterfly Valve: Lightweight, compact structure, quick operation, for large-diameter pipelines.
Marine Ball Valve: Fast quarter-turn operation, tight sealing, ideal for oil and gas service.
Marine Strainer / Y-Type Filter: Filter impurities in the medium to protect downstream equipment.

These valves follow JIS, GB and other marine standards, available in cast iron, cast steel, stainless steel, bronze, for seawater, fresh water, fuel oil, lube oil and compressed air lines.

whatsapp